# gdb(1)
# CLI
```markdown
gdb [opts] [prg [-c coredump | -p pid]]
gdb [opts] --args prg <prg-args>
opts:
-p <pid> attach to pid
-c <coredump> use <coredump>
-x <file> execute script <file> before prompt
-ex <cmd> execute command <cmd> before prompt
--tty <tty> set I/O tty for debugee
```
# Interactive usage
## Misc
```markdown
tty <tty>
Set <tty> as tty for debugee.
Make sure nobody reads from target tty, easiest is to spawn a shell
and run following in target tty:
> while true; do sleep 1024; done
sharedlibrary [<regex>]
Load symbols of shared libs loaded by debugee. Optionally use <regex>
to filter libs for symbol loading.
display [/FMT] <expr>
Print <expr> every time debugee stops. Eg print next instr, see
examples below.
undisplay [<num>]
Delete display expressions either all or one referenced by <num>.
info display
List display expressions.
```
## Breakpoints
```markdown
break [-qualified] <sym> thread <tnum>
Set a breakpoint only for a specific thread.
-qualified: Treat <sym> as fully qualified symbol (quiet handy to set
breakpoints on C symbols in C++ contexts)
break <sym> if <cond>
Set conditional breakpoint (see examples below).
delete [<num>]
Delete breakpoint either all or one referenced by <num>.
info break
List breakpoints.
cond <bp> <cond>
Make existing breakpoint <bp> conditional with <cond>.
tbreak
Set temporary breakpoint, will be deleted when hit.
Same syntax as `break`.
rbreak <regex>
Set breakpoints matching <regex>, where matching internally is done
on: .*<regex>.*
command [<bp_list>]
Define commands to run after breakpoint hit. If <bp_list> is not
specified attach command to last created breakpoint. Command block
terminated with 'end' token.
<bp_list>: Space separates list, eg 'command 2 5-8' to run command
for breakpoints: 2,5,6,7,8.
save break <file>
Save breakpoints to <file>. Can be loaded with the `source` command.
```
## Watchpoints
```markdown
watch [-location|-l] <expr> [thread <tnum>]
Create a watchpoint for <expr>, will break if <expr> is written to.
Watchpoints respect scope of variables, -l can be used to watch the
memory location instead.
rwatch ...
Sets a read watchpoint, will break if <expr> is read from.
awatch ...
Sets an access watchpoint, will break if <expr> is written to or read
from.
```
## Inspection
```markdown
info functions [<regex>]
List functions matching <regex>. List all functions if no <regex>
provided.
info variables [<regex>]
List variables matching <regex>. List all variables if no <regex>
provided.
```
## Signal handling
```markdown
info handle [<signal>]
Print how to handle <signal>. If no <signal> specified print for all
signals.
handle <signal> <action>
Configure how gdb handles <signal> sent to debugee.
<action>:
stop/nostop Catch signal in gdb and break.
print/noprint Print message when gdb catches signal.
pass/nopass Pass signal down to debugee.
catch signal <signal>
Create a catchpoint for <signal>.
```
## Source file locations
```markdown
dir <path>
Add <path> to the beginning of the searh path for source files.
show dir
Show current search path.
set substitute-path <from> <to>
Add substitution rule checked during source file lookup.
show substitute-path
Show current substitution rules.
```
## Configuration
```markdown
set disassembly-flavor <intel | att>
Set the disassembly style "flavor".
set follow-fork-mode <child | parent>
Specify which process to follow when debuggee makes a fork(2)
syscall.
set pagination <on | off>
Turn on/off gdb's pagination.
set breakpoint pending <on | off | auto>
on: always set pending breakpoints.
off: error when trying to set pending breakpoints.
auto: interatively query user to set breakpoint.
set print pretty <on | off>
Turn on/off pertty printing of structures.
set logging <on | off>
Enable output logging to file (default gdb.txt).
set logging file <fname>
Change output log file to <fname>
set logging redirect <on/off>
on: only log to file.
off: log to file and tty.
```
# User commands (macros)
Gdb allows to create & document user commands as follows:
```markdown
define <cmd>
# cmds
end
document <cmd>
# docu
end
```
To get all user commands or documentations one can use:
```markdown
help user-defined
help <cmd>
```
# Hooks
Gdb allows to create two types of command `hooks`
- `hook-` will be run before `<cmd>`
- `hookpost-` will be run after `<cmd>`
```markdown
define hook-<cmd>
# cmds
end
define hookpost-<cmd>
# cmds
end
```
# Examples
## Automatically print next instr
When ever the debugee stops automatically print the memory at the current
instruction pointer (`$rip` x86) and format as instruction `/i`.
```markdown
# rip - x86
display /i $rip
# step instruction, after the step the next instruction is automatically printed
si
```
## Conditional breakpoints
Create conditional breakpoints for a function `void foo(int i)` in the debugee.
```markdown
# Create conditional breakpoint
b foo if i == 42
b foo # would create bp 2
# Make existing breakpoint conditional
cond 2 if i == 7
```
## Catch SIGSEGV and execute commands
This creates a `catchpoint` for the `SIGSEGV` signal and attached the `command`
to it.
```markdown
catch signal SIGSEGV
command
bt
c
end
```
## Run `backtrace` on thread 1 (batch mode)
```markdown
gdb --batch -ex 'thread 1' -ex 'bt' -p <pid>
```
## Script gdb for automating debugging sessions
To script gdb add commands into a file and pass it to gdb via `-x`.
For example create `run.gdb`:
```markdown
set pagination off
break mmap
command
info reg rdi rsi rdx
bt
c
end
#initial drop
c
```
This script can be used as:
```markdown
gdb --batch -x ./run.gdb -p <pid>
```
## Hook to automatically save breakpoints on `quit`
```markdown
define break-save
save breakpoint $arg0.gdb.bp
end
define break-load
source $arg0.gdb.bp
end
define hook-quit
break-save quit
end
```
## Watchpoint on struct / class member
A symbolic watchpoint defined on a member variable for debugging is only valid
as long as the expression is in scope. Once out of scope the watchpoint gets
deleted.
When debugging some memory corruption we want to keep the watchpoint even the
expression goes out of scope to find the location that overrides the variable
and introduces the corruption.
```markdown
(gdb) l
1 struct S { int v; };
2
3 void set(struct S* s, int v) {
4 s->v = v;
5 }
6
7 int main() {
8 struct S s;
9 set(&s, 1);
10 set(&s, 2);
11 set(&s, 3);
...
(gdb) s
set (s=0x7fffffffe594, v=1) at test.c:4
4 s->v = v;
# Define a new watchpoint on the member of the struct. The expression however
# is only valid in the current functions scope.
(gdb) watch s->v
Hardware watchpoint 2: s->v
(gdb) c
Hardware watchpoint 2: s->v
Old value = 0
New value = 1
set (s=0x7fffffffe594, v=1) at test.c:5
5 }
# The watchpoint gets deleted as soon as we leave the function scope.
(gdb) c
Watchpoint 2 deleted because the program has left the block in
which its expression is valid.
main () at test.c:10
10 set(&s, 2);
(gdb) p &s->v
$1 = (int *) 0x7fffffffe594
# Define a watchpoint o the address of the member variable of the s instance.
# This of course only makes sense as long as the s instance is not moved in memory.
(gdb) watch *0x7fffffffe594
Hardware watchpoint 3: *0x7fffffffe594
(gdb) c
Hardware watchpoint 3: *0x7fffffffe594
Old value = 1
New value = 2
set (s=0x7fffffffe594, v=2) at test.c:5
5 }
(gdb) c
Hardware watchpoint 3: *0x7fffffffe594
Old value = 2
New value = 3
set (s=0x7fffffffe594, v=3) at test.c:5
5 }
```
# Know Bugs
## Workaround `command + finish` bug
When using `finish` inside a `command` block, commands after `finish` are not
executed. To workaround that bug one can create a wrapper function which calls
`finish`.
```markdown
define handler
bt
finish
info reg rax
end
command
handler
end
```